NANOTECHNOLOGY FOR
PHOTOVOLTAIC EFFICIENCY
RENDI I TUOI PANNELLI DIFFICILMENTE ATTACCABILI DALLO SPORCO E MANTIENILI PULITI IN MODO AUTOMATIZZATO, MIGLIORANDONE L'EFFICIENZA DI PRODUZIONE AUMENTANDO L'APPROVVIGIONAMENTO MEDIO DI LUCE
THE EFFICIENCY AND PERFORMANCE OF YOUR PHOTOVOLTAIC SYSTEM
ARE AFFECTED BY THREE MAIN ISSUES
​
Dust, dirt and fine particles are omnipresent in industrial/domestic areas and systematically reduce the optical efficiency of a system: just 10g of dust distributed on the panel leads to a significant loss of efficiency
Occasional cleaning of the panels does not permanently eliminate the dirt that settles and clings even on the same day of washing. Rain often contains: substances of volcanic origin, sublimations of solids from the earth's crust, dust, sea spray and metabolic products of living organisms which lead to further loss of efficiency of the system. Furthermore, the panels can get dirty again on the same day of cleaning due to rain or a storm.
The silicon-based structure of the panels suffers from significant losses due to a non-ideal operating temperature (below and above 25-30°C). On a hot day where the panel can reach 150°C, losses of up to 20% can occur due to overheating alone
CLEAN YOUR PHOTOVOLTAIC IN A SMART WAY
MOST PEOPLE HAVE A PHOTOVOLTAIC SYSTEM INSTALLED AT HOME AND THEN THEY FORGET ABOUT IT, THINKING THAT IT DOES NOT REQUIRE ANY REGULAR MAINTENANCE. DON'T MAKE THIS MISTAKE!
If you are thinking of installing a photovoltaic system, whether based on new or used panels, we can treat your panels with nanotechnology before installing them, making a deep cleaning and decontamination cycle with professional technical products, carried out by trained personnel: this will guarantee cleaning that lasts a long time and will prevent dirt from clinging, improving efficiency and reducing production waste.
When is it best to treat the panels?
LET'S ADD A COOLING SYSTEM TO FURTHER IMPROVE EFFICIENCY
PUT THE TEMPERATURE OF YOUR SYSTEM UNDER CONTROL
WITH THIS STRATEGIC ADDITION YOU CAN ACHIEVE A LOT: A SIMPLE NETWORK OF HOSES AND NOZZLES THAT KEEP YOUR PANELS WET AND COOL WHEN THEY NEED TO BE UNDER TEMPERATURE CONTROL. THIS PLUS CARRIES AWAY THE DIRT, GUARANTEES CLEANLINESS AND EFFICIENCY
THE BENEFITS OF NANOTECHNOLOGICAL TREATMENT FOR PHOTOVOLTAICS
LET'S DO THE MATH TO UNDERSTAND HOW MUCH WE SAVE? (example on 6KW in 10 years - half the useful life of the panel)
Let's make a calculation for a 6kw photovoltaic system (it must be well proportioned to your consumption), for example 10 panels, 600w each, distributed over 50 square meters space, roof or ground.
Cleaning each time would cost around €500 if done professionally*, which in 10 years brings the cost to € 5,000 .
Most people don't do it and this will cause the system to lose efficiency to an extent proportional to the quantity and type of dirt.
*(consider that a job done well requires the use of safe aerial platforms and cleaning with osmotized water)
​
Making a general estimate, the dirt that accumulates every day and the inefficiency from excessive heat in hot periods also erode 25% of production per year, which for a 6kW system (which produces on average 7000Kwh/year) a loss of at least 1750KWh , due to dirt.
This means that you leave €175/year - €1750/10 years of electricity you are wasting because you don't produce it and you can't sell it to the system (average selling price at €0.10/Kwh) Moreover you need to buy that lack of power back from the market at €525 (Considering an average purchase price of €0.3/kwh and continuously increasing prices over the last 20 years))
SAVINGS IN 10 YEARS FROM THE COMBINATION OF NANOTECHNOLOGY + WET SYSTEM
- €5000 (you no longer have to cleaned them)
- €5250 (avoid buying back electricity that is not wasted due to inefficiency)
MORE THAN €10,000 SAVED IN 10 YEARS